Filter by tags: Mass Rosatom Clear all tag filters
5 news articles found
Manufacturing and testing of prototype first wall panels for the International Thermonuclear Experimental Reactor (ITER) fusion machine has been successfully completed, says St Petersburg-based JSC NIIEFA - part of the Russian state nuclear corporation Rosatom.
- Source: World Nuclear News
- Date: Friday, 12 January 2024
- Original article: world-nuclear-news.org/Articles/Russia-ready-to-mass-produce-first-wall-panels-for
Rosatom has installed the fifth tier of the internal containment (VZO) at unit 1 of the Akkuyu nuclear power plant under construction in Turkey, Akkuyu Nuclear said on 17 January. Steam generators have also been delivered for Akkuyu 2.
- Source: NEI Magazine
- Date: Friday, 21 January 2022
- Original article: neimagazine.com/news/newsprogress-at-turkeys-akkuyu-nuclear-plant-as-sgs-are-delivered-9416142
The Volgodonsk branch of Russia’s AEM-technology Atommash (part of Rosatom’s mechanical engineering division Atomenergomash) said on 6 August that it had manufactured a set of elbows for the main circulation pipeline (MCP) for units 7 and 8 of China’s Tianwan NPP and units 3 and 4 of the Xudabao NPP. The work was carried out in two stages at the thermal press section of Atommash. At first, the specialists performed ovalisation - the blanks with the help of a press were given the necessary oval shape. At the second stage, the bending of the products took place. After two-stage holding in an oven at a temperature of 870 to 1080 degrees, the elbows were placed in a specialised stamp. Under pressure from a press with a force of 6,000 ton-forces, the workpieces were bent at 29 degrees. The mass of the finished product is 2 tons, the diameter is 1050mm. In total, specialists manufactured 16 MCP components for the two NPPs in China.
- Source: NEI Magazine
- Date: Thursday, 12 August 2021
- Original article: neimagazine.com/news/newsrussia-manufactures-main-circulating-pump-elbows-for-chinas-tianwan-and-xudabao-npps-8989564
The Petrozavodsk branch of AEM-Technologies JSC (part of Rosatom’s mechanical engineering division Atomenergomash) said on 8 July it had carried out cargo tests of two casings for the main circulation pumping units (MCPU) for unit 2 of the Akkuyu NPP being built in Turkey. The purpose of the cargo tests is to control the strength of the welded seams between the trunnions and the reactor coolant pipeline (RCP) body.
- Source: NEI Magazine
- Date: Thursday, 15 July 2021
- Original article: neimagazine.com/news/newscargo-testing-completed-of-pump-casings-for-akkuyu-npp-8893811
Scientists from Russia’s National Research Technological University "MISiS" have developed a prototype of a nuclear battery, which is significantly cheaper than analogues, the corporate newspaper of the State Corporation Rosatom said on 14 October.
- Source: NEI Magazine
- Date: Friday, 16 October 2020
- Original article: neimagazine.com/news/newsrussian-scientists-develop-atomic-battery-8182084