Latest News

Filters

Filter by tags: Nuclear fuel Canada Silicon Clear all tag filters

18 news articles found


US-based Ultra Safe Nuclear Corporation (USNC), which is developing fourth-generation gas-cooled microreactors has selected Gadsden in Alabama as the location of the company’s MMR Assembly Plant (MAP). The facility will manufacture, assemble, test, and inspect the non-radiological modules needed to construct USNC’s Micro-Modular Reactor (MMR). No radioactive material will to be used or stored at the facility. The 578,000 square foot highly automated factory will feature state-of-the-art advanced manufacturing processes and equipment and will be capable of producing up to 10 complete MMR nuclear units a year.

Date: Wednesday, 28 June 2023
Original article: neimagazine.com/news/newsalabama-site-selected-for-mmr-assembly-plant-10967792

Ultra Safe Nuclear Corporation (USNC) has delivered uranium nitride coated uranium oxycarbide tristructural isotropic (TRISO) fuel to NASA's Space Nuclear Power and Propulsion programme. The company says this demonstrates the "flexibility, precision and value" of its Pilot Fuel Manufacturing Facility (PFM).

Date: Thursday, 15 June 2023
Original article: world-nuclear-news.org/Articles/USNC-delivers-TRISO-particle-fuel-to-NASA

A repurposed parking lot at Atomic Energy of Canada Limited’s (AECL’s) Chalk River campus has been selected as the site for construction of a demonstration Micro-Modular Reactor (MMR), according to a joint statement by AECL, Canadian Nuclear Laboratories (CNL) and Global First Power (GFP).

Date: Thursday, 18 May 2023
Original article: neimagazine.com/news/newscanada-selects-site-for-first-mmr-10858795

Companies say commercial agreement is first of kind Ultra Safe said its USNC MMR will deliver cost-effective electricity and process heat to users anywhere. Courtesy Ultra Safe. Urenco USA will supply enriched uranium to Ultra Safe Nuclear Corporation to manufacture fuel for its micro-modular reactor (MMR).

Ultra Safe said the agreement marks the first commercial supply of enriched uranium product (EUP) for use in an advanced nuclear reactor in the world.

Ultra Safe said it will buy enriched EUP from Urenco USA for use in the manufacture of tri-structural isotropic (Triso) particles and fully ceramic micro-encapsulated (FCM) fuel via Ultra Safe’s planned joint venture with Framatome in the US.

The EUP will be produced and supplied by the Urenco USA uranium enrichment facility in New Mexico.

Kurt Terrani, executive vice-president at Ultra Safe said the company has been working hard to manage and de-risk the front end of our fuel cycle.

Date: Saturday, 04 March 2023
Original article: nucnet.org/news/urenco-to-provide-enriched-uranium-for-ultra-safe-s-mmr-3-5-2023

Companies have ‘concrete plans’ for rapid expansion The new JV plans to begin manufacturing Triso particles and FCM fuel in late 2025. Courtesy USNC. France-based nuclear company Framatome and US-based Ultra Safe Nuclear have signed a non-binding agreement to form a joint venture to bring commercially viable, fourth-generation nuclear fuel to market for USNC’s micro-modular reactor (MMR) and other advanced nuclear power plant designs.

The joint venture expects to begin manufacturing Triso particles and fully ceramic microencapsulated (FCM) fuel in late 2025.

The two companies said they had developed “concrete plans” to support rapid expansion to meet demand growth for advanced nuclear fuel in the US and global markets.

The partnership follows the opening of USNC’s pilot fuel manufacturing facility at Oak Ridge, Tennessee, in August, the first and only privately funded facility in the US to manufacture Triso particles.

Date: Tuesday, 31 January 2023
Original article: nucnet.org/news/framatome-usnc-joint-venture-aims-to-begin-manufacturing-in-2025-1-1-2023

Canada’s McMaster University, Ultra Safe Nuclear Corporation (USNC), and Global First Power (GFP) have signed a Memorandum of Understanding to further examine the feasibility of deploying a Micro Modular Reactor (MMR) at McMaster University, or an affiliated site.

Date: Friday, 16 December 2022
Original article: neimagazine.com/news/newscanadian-partners-to-study-deployment-of-micro-modular-reactor-10439214

First Xe-100 plant could be operational by 2028 Proponents say nuclear plants like the Xe-100 could be built quicker and less expensively than traditional models. Courtesy X-energy. Work has begun on the construction of a $300m nuclear fuel fabrication plant for next-generation nuclear reactors in Oak Ridge, Tennessee.

X-energy’s Triso-X facility is being funded initially as part of a $3.2bn federal programme to develop, build and demonstrate advanced reactors. The goal is for the plant to be commissioned and operational by 2025.

The fuel produced at the facility will be used in X-energy’s Xe-100 high-temperature gas reactors, expected to be operational by 2028. The first project would be a 320 MW four-unit Xe-100 power plant in Washington state.

The US Department of Energy said the fuel fabrication facility has the capacity to produce eight metric tonnes per year of Triso pebble fuel, enough to power 12 of X-energy’s proposed Xe-100 SMRs. The facility would also be capable of manufacturing TRISO fuel for other advanced reactor designs. X-energy said it plans to double its fuel production by the 2030s.

Date: Wednesday, 19 October 2022
Original article: nucnet.org/news/work-begins-on-triso-fabrication-plant-for-x-energy-s-htgr-10-2-2022

Ultra Safe Nuclear Corporation (USNC) has declared open the Pilot Fuel Manufacturing (PFM) facility, which will produce the first fuel for testing and qualification for use in the company's advanced Micro Modular Reactor (MMR). The plant will be the USA's first producer of private-sector TRISO and USNC's patented Fully Ceramic-Microencapsulated - or FCM - fuel.

Date: Tuesday, 23 August 2022
Original article: world-nuclear-news.org/Articles/Pilot-TRISO-fuel-manufacturing-plant-opens-in-Tenn

Ultra Safe Nuclear Corporation (USNC) has adopted two 3D printers from additive manufacturing technology company Desktop Metal to form nuclear-grade silicon carbide for use in its innovative Fully Ceramic Microencapsulated (FCM) nuclear fuel.

Date: Friday, 11 March 2022
Original article: world-nuclear-news.org/Articles/3D-printers-to-be-used-in-fuel-manufacture

The preliminary design of X-energy's TRISO-X Fuel Fabrication Facility to produce tri-structural isotropic (TRISO) fuel on a commercial scale has now been completed, X-energy and Centrus Energy Corp announced today. The companies have also signed a contract for nuclear fuel and services provider Centrus to continue its work as the project enters its next phase.

Date: Wednesday, 03 November 2021
Original article: world-nuclear-news.org/Articles/Preliminary-design-of-TRISO-X-fuel-plant-completed