The Volgodonsk branch of AEM-Technologies (part of Rosatom’s mechanical engineering division, Atomenergomash) has completed manufacture of the elliptical bottom of the reactor vessel for unit 3 of the Akkuyu nuclear power plant, under construction in Turkey.  

The operation took place in two stages. First, a seamless flat billet weighing 80 tons was made from a cylindrical section of metal. Afterwards, the billet was heated for six hours to a maximum temperature of 1020°C and moved to a 10,000 ton press to be formed into its final shape. The metal is 300mm thick. The part will next be welded to the bottom of the 12 metre long cylindrical reactor pressure vessel, which in total will weigh 330 tons. When finished it will be transported 3000km to Akkuyu on Turkey's Mediterranean coast for installation.

AEM-Technologies General Director Igor Kotov noted: “The implementation of the project to construct Turkey’s first NPP   is under close scrutiny at the highest state level. We understand that this imposes a special responsibility on us, both with regard to the exact observance of the equipment delivery schedules, and in relation to the unconditional compliance of all elements of this equipment with the requirements of the Nuclear Regulatory Agency of the Republic of Turkey. We carry out each stage of production in close and professional interaction with our partners, which allows us to find optimal solutions and increase the overall economic efficiency of the project."

In 2010, Turkey and Russia signed an intergovernmental agreement on cooperation in the construction and operation the Akkuyu NPP in Mersin province. Rosatom is building four VVER-1200 reactors at the site, under a build-own-operate model. Construction of the first unit began in 2018, with start-up planned for 2023. The 4800MWe plant when completed is expected to meet about 10% of Turkey's electricity needs.

Photo: The elliptical bottom of the reactor vessel for unit 3 of the Akkuyu NPP  (Photo: Atomenergomash)

Date: Saturday, 23 October 2021
Original article: neimagazine.com/news/newsatommash-manufactures-the-reactor-bottom-for-akkuyu-3-9176646